Most Radiologic Technologist resumes bury the ARRT certification at the bottom and lead with a generic "dedicated healthcare professional" summary. Recruiters spend six seconds scanning for two things: your credentials and your modalities. If they don't see "ARRT (R)" and "CT/MRI/fluoro" in the first third of the page, you're out. Every example below fixes that by putting certifications near the top and leading each bullet with the imaging modality and patient volume.
Header — what Radiologic Technologist resumes need (and what they don't)
Your header should include name, phone, email, city/state, and your primary certification. Don't waste space with a full street address—no one mails you anymore. Include "ARRT (R)" or your specialty credential right under your name or in parentheses next to it. If you hold multiple certifications (CT, MRI, Mammo), list them. Skip LinkedIn URLs unless you're applying to a health tech company; hospitals and imaging centers don't check them.
Summary statement for a Radiologic Technologist
A strong summary for a Radiologic Technologist names your years of experience, certifications, and the modalities you're strongest in. It should also signal patient volume or care setting (trauma, outpatient, pediatric). Three examples:
Entry-level: "ARRT-certified Radiologic Technologist with clinical rotation experience in general radiography and portable imaging. Trained in Siemens and GE equipment. Completed 800+ supervised exams across ED, OR, and inpatient units."
Mid-career: "Radiologic Technologist with 6 years of experience performing 40+ daily exams across X-ray, fluoro, and portable settings. ARRT (R) and CPR certified. Proven ability to maintain image quality while minimizing patient wait times in high-volume EDs."
Senior: "Senior Radiologic Technologist with 12 years across Level I trauma, interventional radiology, and CT. ARRT (R)(CT) certified. Lead protocol development and train new techs on advanced imaging systems including Philips and Canon."
Experience section — bullet structure for Radiologic Technologist
Every bullet should start with the modality or task, followed by patient volume or outcome. Use numbers: exams per day, retake rates, patient satisfaction scores, equipment uptime. Avoid "Responsible for taking X-rays"—that's assumed. Instead: "Performed 50+ daily general radiography exams in ED with <2% retake rate." If you worked with specialized populations (pediatric, bariatric, ICU), call it out. Mention any quality assurance, protocol optimization, or cross-training you led.
Skills section — top 10 for Radiologic Technologist
List certifications first, then modalities, then software/equipment brands. Recruiters scan this section for keyword matches with the job description. If the posting mentions "PACS" or "Epic," mirror that language exactly.
- ARRT (R) Certification
- CT, MRI, or Fluoroscopy (modality-specific)
- PACS (Epic, Cerner, or system-specific)
- Radiation safety & ALARA principles
- Portable and OR imaging
- Patient positioning and immobilization
- Quality assurance and equipment calibration
- Pediatric and geriatric imaging techniques
- IV contrast administration (if certified)
- CPR/BLS certification
Education + certifications for Radiologic Technologist
Put your education after your experience unless you're entry-level. List your degree, school, and graduation year. Follow it immediately with your ARRT certification, state license number (if required by your state), and any specialty credentials (CT, MRI, Mammo). Include your CPR/BLS expiration date only if the job posting asks for it. If you've completed continuing education in a specialized area (bone densitometry, interventional), list it here under "Additional Certifications."
Action verbs to use
Strong verbs signal efficiency and technical skill. Link to synonym pages to find alternatives that fit your specific accomplishments.
- Automated — "Automated QA checks on CR equipment, reducing calibration errors by 18%."
- Executed — Works for protocol implementation or high-stakes imaging procedures.
- Coordinated — Use when you scheduled portable exams across multiple units or managed OR imaging logistics.
- Optimized — Ideal for workflow improvements or radiation dose reduction projects.
- Trained — Essential for any tech who onboards new hires or students.
- Reduced — Perfect for retake rates, patient wait times, or contrast waste.
3 condensed example resumes
Entry-level Radiologic Technologist
Jordan Lee, ARRT (R)
Portland, OR | (503) 555-0198 | jordan.lee@email.com
Summary
ARRT-certified Radiologic Technologist with clinical training in general radiography, portable imaging, and fluoroscopy. Completed 800+ supervised exams across emergency, surgical, and inpatient settings. Proficient in PACS, Siemens equipment, and ALARA protocols.
Experience
Clinical Extern | Providence Portland Medical Center | Jan 2025 – May 2025
- Performed 15–20 daily X-ray exams under supervision in ED, ICU, and OR with 98% first-pass image acceptance
- Assisted with portable chest and abdomen imaging for 200+ critically ill patients
- Documented procedures in Epic and uploaded images to PACS within 5 minutes of completion
Radiography Intern | OHSU Hospital | Sep 2024 – Dec 2024
- Conducted 300+ general radiography exams including pediatric and geriatric positioning techniques
- Supported fluoro procedures for GI studies and joint injections
- Maintained equipment logs and completed daily QA checks on DR systems
Education
Associate of Applied Science in Radiologic Technology | Portland Community College | 2025
Certifications
ARRT (R) | CPR/BLS
Skills
General radiography | Portable imaging | Fluoroscopy | PACS (Epic, Cerner) | Siemens equipment | Radiation safety | Patient positioning
Mid-career Radiologic Technologist
Morgan Patel, ARRT (R)
Austin, TX | (512) 555-0234 | morgan.patel@email.com
Summary
Radiologic Technologist with 6 years performing 40+ daily exams across X-ray, fluoro, and portable settings in a 400-bed hospital. ARRT (R) and CPR certified. Reduced retake rates by 15% through protocol refinement and peer training.
Experience
Radiologic Technologist | Ascension Seton Medical Center | June 2021 – Present
- Perform 40–50 daily diagnostic X-rays in ED, OR, and inpatient units with 1.8% retake rate
- Conduct fluoroscopy for GI, GU, and orthopedic procedures with contrast administration
- Train 8 new hires and 12 clinical students on GE equipment, PACS workflows, and patient safety protocols
- Led ALARA initiative that reduced repeat exposures by 15% over 18 months
Radiologic Technologist | St. David's South Austin Medical Center | May 2019 – June 2021
- Completed 30+ portable exams daily in ICU, NICU, and post-op recovery
- Assisted in 200+ OR cases including C-arm imaging for orthopedic and vascular procedures
- Maintained equipment uptime of 98% through daily QA and proactive maintenance requests
Education
Associate of Applied Science in Radiologic Technology | Austin Community College | 2019
Certifications
ARRT (R) | Texas Medical Board License #RT123456 | CPR/BLS
Skills
General radiography | Fluoroscopy | Portable & OR imaging | PACS (Epic) | GE & Philips equipment | Radiation dose management | IV contrast admin | Patient care
Senior Radiologic Technologist
Alex Nguyen, ARRT (R)(CT)
San Francisco, CA | (415) 555-0456 | alex.nguyen@email.com
Summary
Senior Radiologic Technologist with 12 years across Level I trauma, interventional radiology, and CT imaging. ARRT (R)(CT) certified. Lead protocol development, equipment validation, and clinical training for a 50-tech department. Perform 30+ CT exams daily with advanced reconstruction and cardiac imaging expertise.
Experience
Lead CT Technologist | UCSF Medical Center | March 2020 – Present
- Perform 30–35 CT exams daily including trauma, stroke, cardiac CTA, and IR-guided biopsies
- Developed low-dose CT protocols for pediatric patients, reducing radiation exposure by 22%
- Train and mentor 12 techs on Siemens and Canon CT systems, contrast protocols, and 3D reconstruction
- Coordinate imaging schedules for 6 OR suites and interventional radiology procedures
- Serve on hospital Radiation Safety Committee; conduct quarterly equipment audits
Radiologic Technologist II | Kaiser Permanente San Francisco | Jan 2016 – March 2020
- Conducted 40+ daily exams across X-ray, fluoro, and portable modalities in high-volume ED
- Cross-trained in CT and MRI; performed 15+ CT exams per shift during tech shortages
- Led implementation of new PACS integration, reducing image upload time by 40%
Radiologic Technologist | Sutter Health | June 2013 – Dec 2015
- Performed general radiography, fluoroscopy, and OR imaging for 300-bed community hospital
- Assisted with C-arm procedures for orthopedic and pain management cases
Education
Bachelor of Science in Health Sciences | San Francisco State University | 2017
Associate of Science in Radiologic Technology | City College of San Francisco | 2013
Certifications
ARRT (R)(CT) | California Certified Radiologic Technologist (CRT) #12345 | CPR/BLS | IV Contrast Certification
Skills
CT imaging (trauma, stroke, cardiac) | General radiography | Fluoroscopy | Interventional radiology | PACS administration | Protocol development | Radiation dose optimization | Siemens, Canon, GE equipment | Epic, Cerner | Staff training & QA
Senior Radiologic Technologist resumes after 15+ years — what to compress, what to keep
If you've been in the field for over 15 years, your resume risks looking like a chronological encyclopedia. Recruiters care about your recent modalities and leadership, not every portable exam you did in 2009. Keep the last 10–12 years of experience detailed with bullet points. For earlier roles, compress them into a single "Early Career" section with one line per employer: "Radiologic Technologist | Community Regional Medical Center | 2008–2013 | General radiography and fluoro in 200-bed hospital." Drop outdated technologies (film-based systems, obsolete PACS) unless the job specifically asks. Focus your bullets on advanced modalities (CT, MRI, IR), protocol development, training, and quality metrics. If you've moved into lead or supervisory roles, emphasize team size, budget responsibility, and process improvements. Your certifications matter more than old job titles—make sure ARRT credentials, state licenses, and specialty certs are front and center. For ideas on crafting a strong opening statement, see resume objective examples.
Resume in good shape? Sorce will apply to dozens of jobs for you. 40 free a day.
Related: Home Health Aide resume, Special Education Teacher resume, Radiologic Technologist cover letter, Radiologic Technologist resignation letter, Marketing Manager resume
Frequently Asked Questions
- What's the most important thing to include on a Radiologic Technologist resume?
- Certifications (ARRT, state licenses) and modality-specific experience. Recruiters check for these first, along with your scan volume and quality assurance metrics.
- Should I list every imaging modality I've used on my resume?
- Yes, but prioritize the ones relevant to the job posting. If they need CT experience, put CT first in your skills section and highlight it in your bullets.
- How far back should a senior Radiologic Technologist's resume go?
- Focus on the last 10–12 years of experience. Earlier roles can be condensed into a single line or omitted entirely if they don't add technical value.