Pipefitter Journeyman
$83,200–$83,200 year
On-siteBoise, Idaho, United States
Boise, Idaho, United StatesOn-siteFull Time$83,200–$83,200 yearAssociates DegreeEnterprise
Full TimeAssociates DegreeEnterprise
Job Summary
Lay out, fabricate, assemble, and maintain piping and piping systems for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial processing systems. Select pipe types and sizes per specifications, inspect worksites for obstructions, and plan installation sequences to avoid conflicts. Cut, thread, bend, and assemble metal and nonmetal pipes using various tools and machines. Join pipes via threaded, caulked, wiped, soldered, brazed, fused, or cemented joints. Install and maintain refrigeration and air-conditioning systems, including compressors, pumps, meters, and controls. Test piping systems for leaks by increasing pressure and observing gauges. Weld holding fixtures to structural steel members. Promote and comply with all company safety policies, participate in daily toolbox meetings, and maintain in-depth relations with the team and supervisor. May travel up to 90% to different job sites on limited notice. Full-time schedule of 50 hours per week subject to project requirements.
Required Qualifications
- 4+ years related experience and/or training or equivalent combination of education and experience
- Applicable Pipefitter training and certificate from NCCER, NCCCO, or from approved 3rd party certification body
- Be knowledgeable of MIC Health and Safety programs and project specific regulations
- Ability to work within precise standards of accuracy and follow set procedures and standards
- Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)
- Must be able to abide by all safety and fall-protection requirements
- Must be able to wear and utilize all safety equipment required for work at heights
- See well (either naturally or with correction)
- Hear well (either naturally or with correction)
- Coordinate the use of eyes, hands, and feet
- Ability to lift and carry objects weighing up to 50 pounds
- Stamina to perform this task repetitively and continuously for several hour intervals
- Ability to work at heights
- Must be able to maintain physical strength and stamina
- Ability to move in and around confined, cluttered, and uneven areas
- Ability to work in varying temperatures and outside conditions
- Ability to work in extreme temperatures
- Ability to work in loud noises
- Ability to work in dirt, dust, fumes, smoke, unpleasant odors
- Ability to stoop, kneel, balance, crouch, crawl, and climb
- Ability to push, pull
- Ability to use arms, hands, and legs fully
- Ability to evaluate information based on measurable standards
- Ability to see details in objects or drawings and recognize slight differences in shapes and shadings
- Ability to visualize objects in three dimensions from drawings
- Ability to keep good balance
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Ability to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Common sense understanding to carry out instructions furnished in written or oral form
- Ability to maintain in-depth relations with all members of their team and your supervisor
- Must be able to travel to different jobsites on limited notice
- Must be able to travel up to 90%
- Must be able to work a 12-hour shift
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights and must be able to abide by all safety and fall-protection requirements
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
- Must be able to work in dirt, dust, fumes, smoke, unpleasant odors
- Must be able to stoop, kneel, balance, crouch, crawl, and climb
- Must be able to push, pull
- Must be able to use arms, hands, and legs fully
- Must be able to evaluate information based on measurable standards
- Must be able to see details in objects or drawings and recognize slight differences in shapes and shadings
- Must be able to visualize objects in three dimensions from drawings
- Must be able to keep good balance
- Must be able to maintain physical strength and stamina
- Must be able to work repetitively and continuously for several hour intervals
- Must be able to work in Uncontrolled environmental conditions
- Must be able to work at heights
- Must be able to wear and utilize all safety equipment required for work at heights
- Must be able to see well (either naturally or with correction)
- Must be able to hear well (either naturally or with correction)
- Must be able to coordinate the use of eyes, hands, and feet
- Must be able to maintain in-depth relations with all members of their team and your supervisor
- Must be able to work within precise standards of accuracy and follow set procedures and standards
- Must be able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
- Must be able to add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
- Must be able to have common sense understanding to carry out instructions furnished in written or oral form
- Must be able to work in and around confined, cluttered, and uneven areas
- Must be able to work at heights
- Must be able to work in varying temperatures and outside conditions
- Must be able to work in extreme temperatures
- Must be able to work in loud noises
Hiring someone like this?
Get your role in front of qualified candidates on Sorce.