Machine Operator, Tumble 1st Shift

Job Summary

Required Qualifications

• •High school diploma or GED
• •Attention to detail
• •Team player
• •Flexibility and Adaptability
• •Willingness to learn and improve
• •Clarity of communication, speech and writing
• •Dependability
• •Adaptability & Trustworthiness
• •Trustworthiness
• •Close vision
• •Depth perception
• •Ability to adjust focus
• •Standing / walking for long periods of time
• •Stooping
• •Repetitive motion
• •Lifting – and or move up to 35 pounds regularly and occasionally 50 pounds
• •Heat
• •Workplace chemicals
• •Regular and consistent attendance
• •Ability to enter data into automated systems (e.g., PLEX)
• •Ability to use RA tester to check the surface finish
• •Ability to use gauss reader to check magnetism
• •Ability to operate the separator
• •Ability to operate wet side crane
• •Ability to use sifter when cob is reusable
• •Ability to set scale properly to each specific part being packed
• •Ability to pull out rocks or mixed parts, and/or properly contain suspect parts
• •Ability to load parts into bowl vibes, rotaries, and box vibes
• •Ability to unload parts from bowl vibes, rotaries, and box vibes
• •Ability to clean up rocks and/or parts that end up on floor
• •Ability to fill out production paperwork and UM paperwork
• •Ability to change out rocks when necessary
• •Ability to change out cob in machines as needed
• •Ability to add the proper oil and amount to parts that require it according to plex
• •Ability to put specific bags into totes unless special directions specified in plex
• •Ability to pack parts into totes to the correct quantities according to plex
• •Ability to coordinate between stations
• •Ability to coordinate with the cob operator
• •Ability to coordinate with the wet side operator
• •Ability to follow production guidelines in the PLEX system
• •Ability to ensure proper labeling and documentation
• •Ability to maintain cleanliness and safety standards
• •Ability to ensure machines have proper rocks, soap, and plex tag identification
• •Ability to ensure machines are properly cleaned out
• •Ability to ensure parts are properly labeled
• •Ability to make sure parts can get into dry side in a timely manner
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading mixers
• •Ability to ensure parts are properly labeled when unloading mixers
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers
• •Ability to ensure totes are packed to the correct quantities
• •Ability to ensure specific bags are put into totes unless special directions specified
• •Ability to ensure rocks or mixed parts are pulled out or suspect parts are properly contained
• •Ability to ensure scale is set properly to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts can get into dry side in a timely manner from wet side operator
• •Ability to ensure parts are ready for cob
• •Ability to ensure parts can get into dry side in a timely manner from cob operator
• •Ability to ensure Ford washers are in spec
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex
• •Ability to ensure rocks or mixed parts are pulled out, and/or suspect parts are properly contained
• •Ability to ensure scale is set properly to each specific part being packed to get accurate numbers per each tote
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts are coming from the wet side of the room or from the storage lane
• •Ability to ensure parts are properly labeled when loading bowl vibe cobbers and mixers
• •Ability to ensure parts are properly labeled when unloading mixers using the shaker table
• •Ability to ensure parts are properly labeled when unloading bowl vibe cobbers into proper containers
• •Ability to ensure oil and amount are added to parts that require it according to plex
• •Ability to ensure cob is disposed of when it is not reusable
• •Ability to ensure area is cleaned up (standard 5S) at end of shift
• •Ability to ensure parts will be ready for cob
• •Ability to ensure parts can get into dry side in a timely manner
• •Ability to ensure totes are packed to the correct quantities according to plex
• •Ability to ensure specific bags are put into totes unless special directions specified in plex