Machine Operator II

Job Summary

Required Qualifications

• •Must be able to operate basic fabrication equipment such as Mills, brake press and saw
• •Must be able to read blueprint information for layout work to complete tasks on specific machines
• •Must be able to use measuring equipment to hold specific tolerances
• •Must be physically capable of participating in companywide stretches at 7:00AM and 11:15 daily
• •Must be able to lift 40 pounds of force frequently, and/or up to 20 pounds of force constantly
• •Must have visual acuity to operate machines such as lathes, drill presses, power saws and mills where the seeing job is at or within arm's reach
• •Must have visual acuity to operate motor vehicles or heavy equipment
• •Must be able to bend body downward and forward by bending spine at the waist
• •Must be able to bend legs at knee to come to a rest on knee or knees
• •Must be able to bend the body downward and forward by bending leg and spine
• •Must be able to move about on hands and knees or hands and feet
• •Must be able to extend hand(s) and arm(s) in any direction
• •Must be able to stand for sustained periods of time
• •Must be able to move about on foot to accomplish tasks, particularly for long distances or moving from one work site to another
• •Must be able to ascend or descend ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms
• •Must be able to cope with change
• •Must be able to shift gears comfortably
• •Must be able to decide and act without having the total picture
• •Must be able to handle risk and uncertainty
• •Must be able to exceed goals successfully
• •Must be very bottom-line oriented
• •Must be able to step up to conflicts
• •Must be able to read situations quickly
• •Must be good at focused listening
• •Must be able to hammer out tough agreements and settle disputes equitably
• •Must be able to find common ground and get cooperation
• •Must be able to effectively cope with change
• •Must be able to shift gears comfortably
• •Must be able to decide and act without having the total picture
• •Must be able to handle risk and uncertainty
• •Must be able to be counted on to exceed goals successfully
• •Must be constantly and consistently one of the top performers
• •Must be very bottom-line oriented
• •Must be able to be steadfastly push self and others for results
• •Must be able to work in other areas as needed
• •Must be flexible in taking lunch and breaks when workflow requires
• •Must be willing to work additional hours as necessary
• •Must be able to eliminate waste and continually improve process
• •Must be able to develop knowledge of Lean through supporting area in maintaining highest levels of 5S
• •Must be able to utilize visual management tools that highlight problems and solve those problems for true root cause
• •Must be able to participate and support kaizen events
• •Must be able to participate and support Lean Certification and Minor Kaizen programs
• •Must be able to attend and participate in a variety of meetings, training programs, and task force groups
• •Must be able to integrate activities, communicate issues, obtain approvals, resolve problems
• •Must be able to maintain specific level of knowledge pertaining to changes to equipment or process, new developments, requirements, procedures, and policies
• •Must be able to lead the team
• •Must be able to provide innovative thought leadership on strategies to grow market share, increase profitability, and meet long-term business goals
• •Must be able to work with others constructively and abide by company policies and procedures
• •Must be able to promote safety in department
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use only defect-free equipment
• •Must be able to perform visual and dimensional check of work to verify parts are to specification
• •Must be able to work from shop orders, specifications, prints and instructions
• •Must be able to receive and process raw materials or in-process parts through any range of operations to suit product specifications
• •Must be able to set up, change over and operate the complete range of equipment, machine tools
• •Must be able to position processed material on designated cart system and move to succeeding operations as required to facilitate production flow
• •Must be able to perform or assist with any operations, as required or directed, to maintain workflow or respond to production requirements
• •Must be able to have a positive working attitude toward other employees
• •Must be able to be a team player
• •Must be able to work with others constructively and abide by company policies and procedures
• •Must be able to work together as a team for continuous improvement
• •Must be able to actively participate in continuous improvement of products and processes to better serve customers and improve the overall profitability of E-ONE
• •Must be able to actively seek out work in other areas when current assignment is complete
• •Must be able to make suggestions for improving product quality, processes, safety, and company profitability
• •Must be able to submit implemented improvements utilizing our Minor Kaizen process
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules
• •Must be able to ensure safe operating conditions within area of responsibility
• •Must be able to notify coworkers and supervisors of hazardous acts and conditions
• •Must be able to use proper lifting techniques and overhead hoist when needed
• •Must be able to maintain clean and safe working environment in line with 5-S Philosophy
• •Must be able to participate in hazardous communication training and safety meetings
• •Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards
• •Must be able to identify and segregate non-conforming products
• •Must be able to identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate
• •Must be able to follow the 3 Don'ts: 1) Don't accept poor quality; 2) Don't make poor quality; 3) Don't pass poor quality
• •Must be able to follow E-ONE General Health & Safety Rules