Equipment Operator
$73,549–$73,549 year
On-siteBoulder, Colorado, United States
Job Summary
Operate heavy machinery including boom trimmers, excavators, and feller-bunchers to support right-of-way vegetation maintenance and clearance around power lines. Load and unload vehicles and equipment from trailers, ensuring proper securement per FMCSA regulations. Use hand tools and herbicide equipment to cut brush, remove debris, and treat stumps, while conducting pre-inspections to identify hazards near energized lines. Set up traffic control devices and direct public safety during street blockages. Assist less experienced employees with company policies and OSHA safety practices. Perform routine vehicle and equipment maintenance, reporting specialized needs to the General Foreperson. During emergencies or natural disasters, remain on duty and coordinate crew responses to eliminate hazards and perform tree removal.
Required Qualifications
- Valid First-Aid and CPR cards or ability to obtain within 90 days of hire
- Must have valid driver's or commercial driver's license (dependent upon Division and utility/contract requirements)
- Must be able to wear necessary personal protective equipment (PPE) as required
- Ability to work long hours and overtime during emergencies (including holidays, weekends, storm work) and will be subject to call-out work
- Demonstrate knowledge and trained to perform tree and bucket rescue
- Ability to operate and service all required tools and equipment
- Ability to work both independently and in a group
- Ability to operate heavy equipment such as boom trimmers or mowers, excavators, tub grinder, feller-buncher, etc.
- Knowledge of trees, including identification, growth habits and arboricultural techniques specific to trimming, pruning, repairing, maintaining and removing, in close proximity to energized conductors
- Knowledge and understanding of the American National Standards for Tree Care Operations (ANSI Z133.1-current version)
- Ability to adhere and coach employees on company and industry safety requirements
- Knowledge of electrical circuits and skilled in reading and understanding of circuit maps
- Knowledge of OSHA electric power generation, transmission, and distribution standards
- Ability to determine nominal voltage, proper use of insulated tools near energized parts and distinguish exposed live parts from other parts of electric equipment
- Ability to learn quickly and to follow instructions accurately
- Must be able to communicate with others and represent Wright Tree Service in a professional manner
- Must be able to comprehend and/or read and write both written and verbal job instructions and safety information
- Ability to recognize poisonous plants and take proper safeguard against them
- Must be able to have visual acuity to determine the accuracy, neatness, and thoroughness of work assigned or make general observations of the community; close visual acuity, such as reading a computer screen, reading printed material, inspection of small defects, and using measurement devices
- Ability to enter and exit vehicles and equipment numerous times per day
- Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects
- Possesses the ability to lift, move, and maneuver up to 50 pounds on an infrequent basis and up to 30 pounds on a frequent basis
- Close visual acuity, such as reading a computer screen, reading printed material, inspection of small defects, and using measurement devices
- Routine exposure to weather, climate and temperature, such as rain, heat, sun, cold, snow
- Routine exposure to nature, such as irritating plants, biting or stinging insects, dust, etc
- Routine exposure to noise, vibration, working hazards such as proximity to moving parts, mechanical equipment, moving vehicles, gasoline powered equipment, electrical current, heights, exposure to heat, exposure to chemicals, work in close quarters, narrow aisles or passageways, communicable diseases, bloodborne pathogens, cleaning chemicals, dust, odors, and a variety of pests
- Must be able to lift 50 lbs
- Must be able to lift 30 lbs
- Must be able to lift 50 lbs frequently
- Must be able to lift 50 lbs occasionally
- Must be able to lift 30 lbs frequently
- Ability to bend
- Ability to reach
- Ability to stand
- Ability to walk
- Ability to climb
- Ability to carry
- Ability to grasp
- Ability to talk
- Ability to hear
- Ability to perform repetitive motions
- Ability to reach upward
- Ability to reach downward
- Ability to operate vehicles and equipment as assigned
- Ability to set up warning signs, barriers, flags, relays hand-signals, directs traffic and other applicable traffic control devices to protect employees and members of the public from hazards in and around the work area
- Ability to cooperate with property owner, customer, and emergency personnel when blocking streets or driveways
- Ability to conduct vehicle and equipment inspections to ensure proper working conditions
- Ability to conduct routine maintenance on company vehicles, equipment and tools
- Ability to report specialized vehicle maintenance or equipment needs to General Foreperson
- Ability to assist with contacting and coordinating the crew's response to such work and responsible for determining proper steps necessary to eliminate hazards and trim/remove trees while onsite during emergency response
- Ability to maintain appropriate application records
- Ability to apply herbicide and growth regulators to brush and stumps
- Ability to work around hazardous equipment and in close proximity to energized power lines
- Ability to conduct pre-inspection of work area to identify potential hazards
- Ability to load vehicles and equipment with manageable size limbs and logs not suited for wood chipping
- Ability to maintain a neat and orderly work area
- Ability to stage and clean-up of tools and equipment at the job site
- Ability to identify safety hazards
- Ability to help perform basic maintenance to ensure equipment is within working order
- Ability to help educate less experienced employees on company policies, on-the-job safety practices, approved work methods and OSHA regulations
- Ability to use applicable herbicide equipment to treat stumps and brush
- Ability to work on the ground using hand saws, ground saws or other applicable tools to cut brush, limbs and logs of larger trees
- Ability to utilize a variety of tools (i.e. rake, shovel, leaf blower) to remove debris from work area
- Ability to gather manageable size brush, limbs and logs and carries to the designated chipping area
- Ability to operate heavy machinery such as boom trimmers or mowers, excavators, tub grinder, feller-buncher, etc
- Ability to loads and unloads vehicles and equipment from a trailer
- Ability to be responsible for proper load securement in accordance with company policies, approved work methods and FMCSA regulations
- Ability to drive a vehicle with an attached chipper or other trailing unit to, from or within the work area
- Ability to maintain herbicide application certification or equivalent as required by Wright Tree Service and local, state, and federal law
- Ability to keep informed of new equipment and specifications, standards, practices, and operating procedures
- Ability to read, write, speak English
- Ability to read, write, speak Spanish
- Ability to travel extensive (greater than 50%)
- Ability to comply with applicable federal, state, and local laws, rules, and regulations
- Ability to maintain knowledge of and follow all company policies and procedures
- Ability to maintain regular and punctual attendance at work and meetings
- Ability to support, actively participate, and act in accordance with Wright's culture of safety and employee ownership
- Ability to obtain and maintain a valid DOT medical card in accordance with FMCSA regulations
- Ability to maintain knowledge of and follow all company policies and procedures
- Ability to adhere to and help educate less experienced employees on company policies, on-the-job safety practices, approved work methods and OSHA regulations
- Ability to work in close proximity to energized power lines
- Ability to work around hazardous equipment
- Ability to conduct pre-inspection of work area to identify potential hazards
- Ability to set up warning signs, barriers, flags, relays hand-signals, directs traffic and other applicable traffic control devices
- Ability to cooperate with property owner, customer, and emergency personnel
- Ability to stage and clean-up of tools and equipment at the job site
- Ability to maintain a neat and orderly work area
- Ability to conduct vehicle and equipment inspections
- Ability to conduct routine maintenance on company vehicles, equipment and tools
- Ability to report specialized vehicle maintenance or equipment needs to General Foreperson
- Ability to assist with contacting and coordinating the crew's response to such work
- Ability to determine proper steps necessary to eliminate hazards and trim/remove trees while onsite during emergency response
- Ability to support, actively participate, and act in accordance with Wright's culture of safety and employee ownership
- Ability to comply with applicable federal, state, and local laws, rules, and regulations
- Ability to maintain knowledge of and follow all company policies and procedures
- Ability to maintain regular and punctual attendance at work and meetings
- Ability to work long hours and overtime during emergencies (including holidays, weekends, storm work) and will be subject to call-out work
- Ability to demonstrate knowledge and trained to perform tree and bucket rescue
- Ability to operate and service all required tools and equipment
- Ability to work both independently and in a group
- Ability to operate heavy equipment such as boom trimmers or mowers, excavators, tub grinder, feller-buncher, etc
- Knowledge of trees, including identification, growth habits and arboricultural techniques specific to trimming, pruning, repairing, maintaining and removing, in close proximity to energized conductors
- Knowledge and understanding of the American National Standards for Tree Care Operations (ANSI Z133.1-current version)
- Ability to adhere and coach employees on company and industry safety requirements
- Knowledge of electrical circuits and skilled in reading and understanding of circuit maps
- Knowledge of OSHA electric power generation, transmission, and distribution standards
- Ability to determine nominal voltage, proper use of insulated tools near energized parts and distinguish exposed live parts from other parts of electric equipment
- Ability to learn quickly and to follow instructions accurately
- Must be able to communicate with others and represent Wright Tree Service in a professional manner
- Must be able to comprehend and/or read and write both written and verbal job instructions and safety information
- Ability to recognize poisonous plants and take proper safeguard against them
- Must be able to wear necessary personal protective equipment (PPE) as required
- Ability to have visual acuity to determine the accuracy, neatness, and thoroughness of work assigned or make general observations of the community; close visual acuity, such as reading a computer screen, reading printed material, inspection of small defects, and using measurement devices
- Ability to enter and exit vehicles and equipment numerous times per day
- Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects
- Possesses the ability to lift, move, and maneuver up to 50 pounds on an infrequent basis and up to 30 pounds on a frequent basis
- Ability to bend
- Ability to reach
- Ability to stand
- Ability to walk
- Ability to climb
- Ability to carry
- Ability to grasp
- Ability to talk
- Ability to hear
- Ability to perform repetitive motions
- Ability to reach upward
- Ability to reach downward
- Routine exposure to indoor and outdoor working conditions
- Routine exposure to weather, climate and temperature, such as rain, heat, sun, cold, snow
- Routine exposure to nature, such as irritating plants, biting or stinging insects, dust, etc
- Routine exposure to noise, vibration, working hazards such as proximity to moving parts, mechanical equipment, moving vehicles, gasoline powered equipment, electrical current, heights, exposure to heat, exposure to chemicals, work in close quarters, narrow aisles or passageways, communicable diseases, bloodborne pathogens, cleaning chemicals, dust, odors, and a variety of pests
- Routine exposure to indoor and outdoor working conditions
- Routine exposure to weather, climate and temperature, such as rain, heat, sun, cold, snow
- Routine exposure to nature, such as irritating plants, biting or stinging insects, dust, etc
- Routine exposure to noise, vibration, working hazards such as proximity to moving parts, mechanical equipment, moving vehicles, gasoline powered equipment, electrical current, heights, exposure to heat, exposure to chemicals, work in close quarters, narrow aisles or passageways, communicable diseases, bloodborne pathogens, cleaning chemicals, dust, odors, and a variety of pests
Desired Qualifications
- High School diploma or equivalent preferred, but not required
- Ability to obtain and maintain a valid driver's or commercial driver's license (dependent upon Division and utility/contract requirements) and DOT medical card in accordance with FMCSA regulations
- Maintain herbicide application certification or equivalent as required by Wright Tree Service and local, state, and federal law
- Keeps informed of new equipment and specifications, standards, practices, and operating procedures
- Ability to read, write, speak English
- Ability to read, write, speak Spanish
Hiring someone like this?
Get your role in front of qualified candidates on Sorce.