Equipment Engineering Technician: Fusion Bar Fab

Job Summary

Required Qualifications

• •Military Electronics certification or AS technical degree in electronics
• •2+ years experience maintaining wafer processing equipment
• •Maintenance knowledgeable in multiple of the following equipment: Cleaving, Stacking/Unstacking, Riber 412 Passivation, E-Beam Coating, and FiconTEC UMB Testing systems
• •Maintenance knowledgeable in multiple of the following equipment: Plasmatherm LAPECVD, Matrix Asher, Lam rainbow, Oxford ICP, KLA/SPTS ICP, RENA Semi Auto Wet System, and TEL Mark Vz, ACT 8 photo tracks
• •Practical knowledge and application of electronics, mechanics, vacuum theory, math, computers, and Testing
• •Knowledge of basic computer skills and software programs (i.e. Microsoft products)
• •Knowledge of troubleshooting techniques and ability to learn the operational concepts of systems and how to perform diagnostic and troubleshooting techniques to solve more complex operational and system problems
• •Ability to read and interpret electrical schematics, mechanical drawings, pneumatic diagrams, flow charts and cause and effect diagrams
• •Ability to set up, operate and interpret output of test equipment to include, but not limited to oscilloscopes, digital volt-ohm meters, current and voltage sources and chart recorders
• •Ability to learn and adhere to established company and departmental policies pertaining to day-to-day operations
• •Must meet requirements for Emergency response team
• •Problem Solving: Able to troubleshoot intermediate issues with little to no guidance
• •Initial responder for unscheduled down tools
• •Knowledge of how to read electronic schematics and mechanical blueprints
• •Understand and follow both written procedures and verbal instructions, in the preventive maintenance of wafer fab equipment
• •Individual must be self-motivated and be able to organize and manage his/her daily work as directed by management, Equipment Engineer and or senior technicians
• •Able to work both independently and as part of a team environment
• •Organization: Able to balance planned and unplanned activities in a timely, professional manner
• •Able to effectively communicate progress and completion of task
• •Ability to read, analyze and interpret technical instructions
• •Ability to respond to internal and external inquiries
• •Understand and apply mathematical concepts such as exponents, logarithms for data analysis as required
• •Ability to problem solve, collect data, establish facts to draw valid solutions
• •Able to interpret technical instructions both written and verbal
• •Able to communicate both verbally and written with internal customers
• •Has a basic understanding of processes being ran on tool sets to interface with process team
• •Able to mentor junior team members
• •Experience with robotic handling systems and automated material transfer equipment
• •Servo motors
• •Linear stages
• •Sensors and interlocks
• •Vacuum handling systems
• •Familiarity with automated loading and unloading processes
• •Knowledge of vacuum systems and process chambers
• •Temperature control systems
• •Gas delivery systems
• •Process monitoring equipment
• •Deposition processes
• •Cooling water systems
• •Power supplies
• •Experience performing preventive maintenance and chamber clean activities
• •Optical alignment stages
• •Laser and detector interfaces
• •Familiarity with: Optical power measurements
• •Alignment verification
• •Automated test sequences
• •Ability to support system calibration and troubleshooting activities
• •Work in a Class 100/1000 clean room
• •Wear full clean room attire
• •Work with and/or around chemicals such as acids and solids
• •Work with and/or around gases, both hazardous and non-hazardous
• •Stand for up to 10 hours at a time
• •Lift 50 pounds or push/pull up to 150 pounds
• •Flexibility to work a compressed shift (alternate between 3 and 4 consecutive 12-hour shifts weekly) or Monday – Friday 9.5 hours shifts and when needed
• •Must be able to pass and maintain an ERT clearance through periodic physicals
• •Must be able to pass and maintain an ERT clearance through periodic physicals
• •All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards
• •Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System

Desired Qualifications

• •Preferred Minimum Education
• •Military Electronics certification or AS technical degree in electronics preferred
• •Expected Minimum Years of Related Experience
• •2+ years experience maintaining wafer processing equipment
• •Preferred: maintenance knowledgeable in multiple of the following equipment: Cleaving, Stacking/Unstacking, Riber 412 Passivation, E-Beam Coating, and FiconTEC UMB Testing systems
• •Preferred: maintenance knowledgeable in multiple of the following equipment: Plasmatherm LAPECVD, Matrix Asher, Lam rainbow, Oxford ICP, KLA/SPTS ICP, RENA Semi Auto Wet System, and TEL Mark Vz, ACT 8 photo tracks
• •Strong sense of ownership and urgency
• •Excellent attention to detail
• •Ability to work independently and as part of a team
• •Continuous learner willing to develop expertise across multiple tool platforms
• •Ability to support critical production and development activities in a fast-paced environment
• •This skill set would provide a technician with the capabilities needed to effectively support the entire Fusion Bar manufacturing area while supporting future growth and increasing automation within the factory
• •Ability to read, analyze and interpret technical instructions
• •Ability to respond to internal and external inquiries
• •Understand and apply mathematical concepts such as exponents, logarithms for data analysis as required
• •Ability to problem solve, collect data, establish facts to draw valid solutions
• •Able to interpret technical instructions both written and verbal
• •Able to communicate both verbally and written with internal customers
• •Has a basic understanding of processes being ran on tool sets to interface with process team
• •Able to mentor junior team members
• •Experience with robotic handling systems and automated material transfer equipment
• •Servo motors
• •Linear stages
• •Sensors and interlocks
• •Vacuum handling systems
• •Familiarity with automated loading and unloading processes
• •Knowledge of vacuum systems and process chambers
• •Temperature control systems
• •Gas delivery systems
• •Process monitoring equipment
• •Deposition processes
• •Cooling water systems
• •Power supplies
• •Experience performing preventive maintenance and chamber clean activities
• •Optical alignment stages
• •Laser and detector interfaces
• •Familiarity with: Optical power measurements
• •Alignment verification
• •Automated test sequences
• •Ability to support system calibration and troubleshooting activities
• •Work in a Class 100/1000 clean room
• •Wear full clean room attire
• •Work with and/or around chemicals such as acids and solids
• •Work with and/or around gases, both hazardous and non-hazardous
• •Stand for up to 10 hours at a time
• •Lift 50 pounds or push/pull up to 150 pounds
• •Flexibility to work a compressed shift (alternate between 3 and 4 consecutive 12-hour shifts weekly) or Monday – Friday 9.5 hours shifts and when needed
• •Must be able to pass and maintain an ERT clearance through periodic physicals
• •Must be able to pass and maintain an ERT clearance through periodic physicals
• •All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards
• •Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System
• •Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity – Create an Environment of Trust, Collaboration – Innovate Through the Sharing of Ideas, Accountability – Own the Process and the Outcome, Respect – Recognize the Value in Everyone, Enthusiasm – Find a Sense of Purpose in Work