ASSEMBLY TEAM LEAD - 1ST SHIFT

Job Summary

Required Qualifications

• •High School Diploma or a GED
• •1-2 years related experience
• •Forklift Certified
• •Must have a flexible work schedule
• •Must be present in regular attendance
• •Must arrive at least 15 minutes prior to shift start
• •Must remain until all end of shift procedures are completed
• •Must be able to alternate between sitting or standing at will
• •Must be able to walk
• •Must be able to stoop
• •Must be able to twist
• •Must be able to bend
• •Must exercise clarity of vision for extended periods
• •Must be able to use both gross and fine manipulation of fingers and hands
• •Must be able to reach overhead
• •Must be able to reach at or below the shoulder level
• •Must be able to lift and move boxes with an average weight of 40 lbs
• •Must be able to lift and move boxes with a maximum weight of 50 lbs
• •Must be able to push a cart with an average weight of 260 lbs
• •Must be able to maneuver totes weighing up to 180 pounds with the assist of a lift
• •Must be able to clearly articulate verbal and written instructions
• •Must be able to provide and direct knowledge and understanding of procedures, processes, and plans
• •Must be able to utilize Microsoft Office
• •Must be able to utilize pallet lifts and pallet jacks
• •Must be able to perform basic keyboarding
• •Must be able to manipulate controllers
• •Must be able to speak in person
• •Must be able to speak on the phone
• •Must be able to wear personal safety protective equipment
• •Must be able to communicate and understand instructions
• •Must be able to work in a production environment
• •Must be able to work regularly scheduled shifts
• •Must be able to work overtime
• •Must be able to work weekends
• •Must be able to work outside weather conditions including sunshine, rain, sleet, snow, high or low temperature and humidity
• •Must be able to work in an environment with filtered humidity and temperature controlled air between 65ºF and 80ºF
• •Must be able to occasionally be exposed to moving mechanical parts
• •Must be able to occasionally be exposed to fumes or airborne particles
• •Must be able to occasionally be exposed to unusual elements such as dirt, dust, fumes, smoke and unpleasant odors
• •Must be able to work in a moderate to occasionally loud noise level environment
• •Must be able to maintain knowledge up to date in his/her area of responsibility through continuing education measures
• •Must be able to exercise good judgment/discretion
• •Must be able to pay close attention to details
• •Must be able to report any non-standard findings to his/her management team
• •Must be able to work independently
• •Must be able to work as part of a team
• •Must be willing and open minded to learn and adapt new procedural methods to improve production quality and efficiency
• •Must be able to maintain a high level of safety and cleanliness in the Assembly area
• •Must be able to ensure compliance with legal- and company ordinances
• •Must be able to ensure compliance with ISO-, OSHA- and Environmental Protection regulatory standards
• •Must be able to ensure highest safety standards in his/her area of responsibility
• •Must be able to ensure personnel are conducting assembly processes according to the instruction of the Assembly Trainer
• •Must be able to ensure assembly processes are performed in accordance with ISO procedures and guidelines
• •Must be able to ensure that all associated documentation is correct
• •Must be able to perform routine and consistent visual parts and procedural inspections
• •Must be able to ensure working instructions are being followed
• •Must be able to ensure component accuracy
• •Must be able to correct any identified issues
• •Must be able to coordinate with the Assembly Trainer to ensure each assembler is properly trained on procedures and visual/functional inspections
• •Must be able to coordinate and proactively communicate with Quality Control Inspectors
• •Must be able to identify and segregate non-conforming parts and products from the assembly line
• •Must be able to ensure that all necessary documentation and details are appropriately transferred
• •Must be able to utilize inventory management system to electronically book each production order upon completion of the assembly process
• •Must be able to communicate with the Assembly Supervisor and/or other Assembly Team Leads
• •Must be able to support necessary information exchange between shifts of potential issues that could affect product quality and/or safety
• •Must be able to report hourly and daily assembly output to the Assembly Supervisor
• •Must be able to report any defects or issues that arise
• •Must be able to setup the assembly line for production orders with correct gauges/tools, small parts, slides, barrels, and frames
• •Must be able to verify that assembly line equipment is in proper operating condition
• •Must be able to restock small parts on the assembly line as needed with correct components from the parts wall
• •Must be able to properly document any discrepancies
• •Must be able to continuously monitor and adjust equipment such as frame pin presses, grease machines, and rear sight presses
• •Must be able to maintain knowledge of QC standards, requirements, and procedures
• •Must be able to ensure proper disposition of nonconforming parts
• •Must be able to assist assembly lines to fill in operator absences
• •Must be able to facilitate the achievement of the required daily, weekly, and monthly production goals
• •Must be able to support all LEAN activities in the assembly area
• •Must be able to execute and implement 5S principles
• •Must be able to implement continuous process improvement based on KAIZEN principles
• •Must be able to achieve highest quality standards
• •Must be able to motivate, influence, inspect product, and efficiently set up the production line for each order
• •Must be able to provide direct supervision and oversight, logistical support, training, and leadership to an assembly line
• •Must be able to ensure that efficient production flow is achieved
• •Must be able to maximize quality
• •Must be able to enforce internal standard working practices
• •Must be able to drive quality and productivity with team members
• •Must be able to address complaints and resolve minor personnel issues
• •Must be able to assist with training personnel
• •Must be able to verify that processes are being performed correctly and as instructed
• •Must be able to ensure any mistakes are corrected through accountability of personnel
• •Must be able to provide recommendations and record data for personnel discipline and reward
• •Must be able to coordinate and direct personnel, productivity, and output for his/her assembly line
• •Must be able to ensure that GLOCK products are assembled according to company procedures and productivity goals
• •Must be able to ensure that GLOCK products are assembled according to internal and external quality specifications
• •Must be able to ensure that material needs are met
• •Must be able to ensure that production output is monitored
• •Must be able to supervise and monitor assembly line operators
• •Must be able to provide and direct knowledge and understanding of procedures, processes, and plans
• •Must be able to utilize Microsoft Office
• •Must be able to clearly articulate verbal and written instructions
• •Must be able to provide and direct knowledge and understanding of procedures, processes, and plans
• •Must be able to utilize pallet lifts and pallet jacks
• •Must be able to perform basic keyboarding
• •Must be able to manipulate controllers
• •Must be able to speak in person
• •Must be able to speak on the phone
• •Must be able to wear personal safety protective equipment
• •Must be able to communicate and understand instructions
• •Must be able to work in a production environment
• •Must be able to work regularly scheduled shifts
• •Must be able to work overtime
• •Must be able to work weekends
• •Must be able to work outside weather conditions including sunshine, rain, sleet, snow, high or low temperature and humidity
• •Must be able to work in an environment with filtered humidity and temperature controlled air between 65ºF and 80ºF
• •Must be able to occasionally be exposed to moving mechanical parts
• •Must be able to occasionally be exposed to fumes or airborne particles
• •Must be able to occasionally be exposed to unusual elements such as dirt, dust, fumes, smoke and unpleasant odors
• •Must be able to work in a moderate to occasionally loud noise level environment
• •Must be able to maintain knowledge up to date in his/her area of responsibility through continuing education measures
• •Must be able to exercise good judgment/discretion
• •Must be able to pay close attention to details
• •Must be able to report any non-standard findings to his/her management team
• •Must be able to work independently
• •Must be able to work as part of a team
• •Must be able to be willing and open minded to learn and adapt new procedural methods to improve production quality and efficiency
• •Must be able to maintain a high level of safety and cleanliness in the Assembly area
• •Must be able to ensure compliance with legal- and company ordinances
• •Must be able to ensure compliance with ISO-, OSHA- and Environmental Protection regulatory standards
• •Must be able to ensure highest safety standards in his/her area of responsibility
• •Must be able to ensure personnel are conducting assembly processes according to the instruction of the Assembly Trainer
• •Must be able to ensure assembly processes are performed in accordance with ISO procedures and guidelines
• •Must be able to ensure that all associated documentation is correct
• •Must be able to perform routine and consistent visual parts and procedural inspections
• •Must be able to ensure working instructions are being followed
• •Must be able to ensure component accuracy
• •Must be able to correct any identified issues
• •Must be able to coordinate with the Assembly Trainer to ensure each assembler is properly trained on procedures and visual/functional inspections
• •Must be able to coordinate and proactively communicate with Quality Control Inspectors
• •Must be able to identify and segregate non-conforming parts and products from the assembly line
• •Must be able to ensure that all necessary documentation and details are appropriately transferred
• •Must be able to utilize inventory management system to electronically book each production order upon completion of the assembly process
• •Must be able to communicate with the Assembly Supervisor and/or other Assembly Team Leads
• •Must be able to support necessary information exchange between shifts of potential issues that could affect product quality and/or safety
• •Must be able to report hourly and daily assembly output to the Assembly Supervisor
• •Must be able to report any defects or issues that arise
• •Must be able to setup the assembly line for production orders with correct gauges/tools, small parts, slides, barrels, and frames
• •Must be able to verify that assembly line equipment is in proper operating condition
• •Must be able to restock small parts on the assembly line as needed with correct components from the parts wall
• •Must be able to properly document any discrepancies
• •Must be able to continuously monitor and adjust equipment such as frame pin presses, grease machines, and rear sight presses
• •Must be able to maintain knowledge of QC standards, requirements, and procedures
• •Must be able to ensure proper disposition of nonconforming parts
• •Must be able to assist assembly lines to fill in operator absences
• •Must be able to facilitate the achievement of the required daily, weekly, and monthly production goals
• •Must be able to support all LEAN activities in the assembly area
• •Must be able to execute and implement 5S principles
• •Must be able to implement continuous process improvement based on KAIZEN principles
• •Must be able to achieve highest quality standards
• •Must be able to motivate, influence, inspect product, and efficiently set up the production line for each order
• •Must be able to provide direct supervision and oversight, logistical support, training, and leadership to an assembly line
• •Must be able to ensure that efficient production flow is achieved
• •Must be able to maximize quality
• •Must be able to enforce internal standard working practices
• •Must be able to drive quality and productivity with team members
• •Must be able to address complaints and resolve minor personnel issues
• •Must be able to assist with training personnel
• •Must be able to verify that processes are being performed correctly and as instructed
• •Must be able to ensure any mistakes are corrected through accountability of personnel
• •Must be able to provide recommendations and record data for personnel discipline and reward
• •Must be able to coordinate and direct personnel, productivity, and output for his/her assembly line
• •Must be able to ensure that GLOCK products are assembled according to company procedures and productivity goals
• •Must be able to ensure that GLOCK products are assembled according to internal and external quality specifications
• •Must be able to ensure that material needs are met
• •Must be able to ensure that production output is monitored
• •Must be able to supervise and monitor assembly line operators
• •Must be able to provide and direct knowledge and understanding of procedures, processes, and plans
• •Must be able to utilize Microsoft Office
• •Must be able to clearly articulate verbal and written instructions
• •Must be able to provide and direct knowledge and understanding of procedures, processes, and plans
• •Must be able to utilize pallet lifts and pallet jacks
• •Must be able to perform basic keyboarding
• •Must be able to manipulate controllers
• •Must be able to speak in person
• •Must be able to speak on the phone
• •Must be able to wear personal safety protective equipment
• •Must be able to communicate and understand instructions
• •Must be able to work in a production environment
• •Must be able to work regularly scheduled shifts
• •Must be able to work overtime
• •Must be able to work weekends
• •Must be able to work outside weather conditions including sunshine, rain, sleet, snow, high or low temperature and humidity
• •Must be able to work in an environment with filtered humidity and temperature controlled air between 65ºF and 80ºF
• •Must be able to occasionally be exposed to moving mechanical parts
• •Must be able to occasionally be exposed to fumes or airborne particles
• •Must be able to occasionally be exposed to unusual elements such as dirt, dust, fumes, smoke and unpleasant odors
• •Must be able to work in a moderate to occasionally loud noise level environment
• •Must be able to maintain knowledge up to date in his/her area of responsibility through continuing education measures
• •Must be able to exercise good judgment/discretion
• •Must be able to pay close attention to details
• •Must be able to report any non-standard findings to his/her management team
• •Must be able to work independently
• •Must be able to work as part of a team
• •Must be able to be willing and open minded to learn and adapt new procedural methods to improve production quality and efficiency
• •Must be able to maintain a high level of safety and cleanliness in the Assembly area
• •Must be able to ensure compliance with legal- and company ordinances
• •Must be able to ensure compliance with ISO-, OSHA- and Environmental Protection regulatory standards
• •Must be able to ensure highest safety standards in his/her area of responsibility
• •Must be able to ensure personnel are conducting assembly processes according to the instruction of the Assembly Trainer
• •Must be able to ensure assembly processes are performed in accordance with ISO procedures and guidelines
• •Must be able to ensure that all associated documentation is correct
• •Must be able to perform routine and consistent visual parts and procedural inspections
• •Must be able to ensure working instructions are being followed
• •Must be able to ensure component accuracy
• •Must be able to correct any identified issues
• •Must be able to coordinate with the Assembly Trainer to ensure each assembler is properly trained on procedures and visual/functional inspections
• •Must be able to coordinate and proactively communicate with Quality Control Inspectors
• •Must be able to identify and segregate non-conforming parts and products from the assembly line
• •Must be able to ensure that all necessary documentation and details are appropriately transferred
• •Must be able to utilize inventory management system to electronically book each production order upon completion of the assembly process
• •Must be able to communicate with the Assembly Supervisor and/or other Assembly Team Leads
• •Must be able to support necessary information exchange between shifts of potential issues that could affect product quality and/or safety
• •Must be able to report hourly and daily assembly output to the Assembly Supervisor
• •Must be able to report any defects or issues that arise
• •Must be able to setup the assembly line for production orders with correct gauges/tools, small parts, slides, barrels, and frames
• •Must be able to verify that assembly line equipment is in proper operating condition
• •Must be able to restock small parts on the assembly line as needed with correct components from the parts wall
• •Must be able to properly document any discrepancies
• •Must be able to continuously monitor and adjust equipment such as frame pin presses, grease machines, and rear sight presses
• •Must be able to maintain knowledge of QC standards, requirements, and procedures
• •Must be able to ensure proper disposition of nonconforming parts
• •Must be able to assist assembly lines to fill in operator absences
• •Must be able to facilitate the achievement of the required daily, weekly, and monthly production goals
• •Must be able to support all LEAN activities in the assembly area
• •Must be able to execute and implement 5S principles
• •Must be able to implement continuous process improvement based on KAIZEN principles
• •Must be able to achieve highest quality standards
• •Must be able to motivate, influence, inspect product, and efficiently set up the production line for each order